#2 Crushed Stone in Vermont

At a mud-season driveway rebuild in the Champlain Valley or hill country, #2 Crushed Stone belongs at the rough entrance and beneath heavy traffic areas. Its angular pieces form a coarse bed, and washing removes fine material that could close the spaces. That open character suits ground that softens during spring thaw.

Keep this material in the working portion of the build rather than expecting it to make a tidy travel surface. It fits construction approaches, ditch lining, culvert work, and barn or sugarhouse pads. On Vermont ground affected by deep frost, establish the ditch or culvert path before placing stone where it supports drainage work and the traffic crossing it. A separate surface aggregate can cover it where a more even driving face is wanted.

Construction Entrances

Place a substantial layer of angular rock at the road access point to help strip mud from truck tires leaving the site.

Culvert and Ditch Protection

Place these heavy stones at culvert outlets and along ditches where runoff gathers, helping keep the lining in position.

Heavy Base Layers

Start with this layer beneath farm lanes, equipment pads, or soft soils, then add smaller stone above it.

Drainage Courses

The large voids between the stones let substantial water volumes pass through and move away from the work area.

Resists Traffic Movement

Heavy, oversized stone is less prone to forming ruts or being pushed aside by tires.

Rapid Drainage

With no fines in washed stone, broad openings remain for water to drain through.

Soft-Ground Support

Large angular stone distributes weight across wet or weak ground below.

Limited Upkeep

After placement, maintenance is generally limited to occasional replenishment.