Skip to main content
FREE Delivery!|(802) 214-7850
Bulk Aggregate Delivery Across Bennington County, VT

Bulk Aggregate Delivery Across Bennington County, VT

Vermont Rock Supply handles gravel, stone and aggregate delivery in Bennington County, VT. If you are building a drive, a pad or a shed base here, the material you want is staymat.

Bennington County spans two very different ground regions, and that shapes what goes under your project. The Taconics and the Valley of Vermont run through Bennington, Shaftsbury, Pownal and Arlington.

The Green Mountains run through Stamford, Readsboro, Peru and Bondville.

Ground Conditions Across Bennington County

In the Taconics and the Valley of Vermont, slate, phyllite and shale bedrock sits under thin stony till. The valley floor itself is till, outwash and marble and limestone bedrock.

That valley floor dries early and gives one of the longer working seasons in Vermont. The hill towns on either side stay soft several weeks longer through mud season.

In the Green Mountains, thin stony till covers schist and gneiss on the slopes, with boulders and ledge close to the surface. Sand and gravel outwash sits on the valley floors.

The working season is short up there. Mud season arrives later and lasts longer, and the ground freezes again sooner, so base and paver work is squeezed into late spring through early fall.

Water behaves differently in each zone. In the Taconics and the Valley of Vermont, water comes off the slopes onto the valley floor, and slow-draining till and slate fragments pack tight.

Short steep streams crossing the valley run flashy. In the Green Mountains, rain and snowmelt run off steep, shallow soils fast, so brooks rise quickly.

A drive on a grade sheds water down its own surface unless the crown and the ditch line are right. Erosion follows the same split: bank scour after heavy rain in the valley, and steep-gradient streams scouring banks, ditches and culvert outlets in the mountain towns.

Frost heaving in gravel drives is reliable each spring. Frost depth is set by the town, so confirm footing depth with the town office, and expect a deeper figure on the ridges than on the valley floor.

Materials Delivered in Bennington County

Staymat is the everyday Vermont word for a dense graded crushed base running from about 3/4 inch or 1 inch down to dust. It locks up tight under a roller, which is why it is the base for driveways, parking pads and shed bases.

Vermont specifies subbase work through VTrans Standard Specifications for Construction Section 301, drawing on Section 704: Gravel for Subbase (704.04), Crushed Gravel for Subbase (704.05) and Dense Graded Crushed Stone for Subbase (704.06). Those section numbers are how material is described and ordered in this state.

Below that base course, the finer materials do different jobs. Stone dust beds pavers and flagstone.

Pea stone suits walkways, dog runs and play areas.

River rock and large river rock build decorative beds and dry creek beds that carry roof and drive runoff. Screened loam and garden soil handle lawns and raised beds.

For drainage, 3/4 inch crushed stone and drain rock cover curtain drains, footing drains and dry wells. #57 stone and #67 stone work in drainage trenches and concrete.

Mason sand and washed sand serve brick work, paver joints and bedding under flatwork.

Choosing the Right Material

Rutland County shares ground regions with Bennington County: the Taconics and the Valley of Vermont and the Green Mountains. That ground is the same, so the base and drainage choices carry over unchanged.

Windsor County and Windham County both include the Connecticut River Valley and the Green Mountains. Those regions differ from Bennington County's ground, so the soil and drainage conditions are not the same.

Where the ground is different, the base and drainage reasoning has to be worked out on site rather than carried over from here. Within Bennington County, the split matters more than the county line.

On the valley floor, slow-draining till and slate fragments pack tight, so drainage is the harder question. On the mountain slopes, steep shallow soils shed water fast, so slope protection and ditch work carry more weight.

Bank run gravel is a subbase and bulk fill material, screened rather than crushed. A crushed top course over it gives a firmer running surface.

Stone fill lines steep ditches and holds stream banks.

Delivery Across Bennington County

Vermont Rock Supply delivers bulk aggregate across Bennington County. Coverage includes Bennington, Shaftsbury, Pownal, Arlington, Dorset, Manchester Center and North Bennington.

It also reaches Stamford, Readsboro, Peru, North Pownal, East Dorset, Bondville and East Arlington. You order online, choose a quantity by the ton or by the yard, and pick a delivery date at checkout.

Each product page has a calculator to help size a load. A dump truck then tips the material on site in one pile.

Timing matters in this county. The valley floor dries early and gives a longer working season, while the hill towns stay soft several weeks longer through mud season.

Order Aggregate Delivery in Bennington County

Vermont Rock Supply delivers staymat, bank run gravel, washed stone, sand and soil across Bennington County, from the valley floor at Bennington and Shaftsbury to the hill towns of Stamford and Readsboro. Choose your material, size the load by the ton or yard, and pick a delivery date at checkout to place your order.

Towns we deliver to in Bennington County

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Bennington County

What is staymat and what is it used for in Bennington County?

Staymat is the Vermont yard word for a dense graded crushed base running from about 3/4 inch or 1 inch down to dust. It locks up tight under a roller, so it works as the base for driveways, parking pads and shed bases. Vermont specifies this kind of material through VTrans Section 301, drawing on Section 704 for gravel, crushed gravel and dense graded crushed stone for subbase.

How deep should a gravel driveway base be in Bennington County?

Depth depends on your ground and your drainage, and there is no single figure that fits every site. In the Taconics and the Valley of Vermont, slow-draining till and slate fragments pack tight, so drainage is the harder question. On the Green Mountain slopes, water runs off fast, so ditch work and slope protection carry more weight. Frost depth is set by the town, so confirm footing depth with the town office.

How much gravel do I need for my project?

Each product page has a calculator to help you size a load. Quantities are ordered by the ton or by the yard, and you choose the quantity when you order online. Pick a delivery date at checkout, and a dump truck tips the material on site in one pile.